3.5 ton sams club Michelin floor jack

[n***@hotmail.com]

I have a 3.5 ton sams club Michelin floor jack , it needed fluid and
when i took out the refill plug , the spring and crome balls came
out , i picked up the parts and there were 2 balls ( big and small ) ,
i can Not find any info on the web about these , the Question is , IS
there 2 balls or is there only ment to be 1 ??? and what order do they
go back in ?
thx

[Steve W.]

Post by n***@hotmail.com
I have a 3.5 ton sams club Michelin floor jack , it needed fluid and
when i took out the refill plug , the spring and crome balls came
out , i picked up the parts and there were 2 balls ( big and small ) ,
i can Not find any info on the web about these , the Question is , IS
there 2 balls or is there only ment to be 1 ??? and what order do they
go back in ?
thx

That wasn't the fill plug. That was the pump valve.

Small valve to bottom large ball on top. The spring usually goes between
them.

[n***@hotmail.com]

Post by Steve W.

Post by n***@hotmail.com
I have a 3.5 ton sams club Michelin floor jack , it needed fluid and
when i took out the refill plug , the spring and crome balls came
out , i picked up the parts and there were 2 balls ( big and small ) ,
i can Not find any info on the web about these , the Question is , IS
there 2 balls or is there only ment to be 1 ??? and what order do they
go back in ?
thx

That wasn't the fill plug. That was the pump valve.
Small valve to bottom large ball on top. The spring usually goes between
them.
--
Steve W.

thanks Steve , i tried that and didn't work , i put the small ball 1st
then the big ball then the spring and plug, it WORKS , thanks for the
idea though ,

[Steve W.]

Post by n***@hotmail.com

Post by Steve W.

Post by n***@hotmail.com
I have a 3.5 ton sams club Michelin floor jack , it needed fluid and
when i took out the refill plug , the spring and crome balls came
out , i picked up the parts and there were 2 balls ( big and small ) ,
i can Not find any info on the web about these , the Question is , IS
there 2 balls or is there only ment to be 1 ??? and what order do they
go back in ?
thx

That wasn't the fill plug. That was the pump valve.
Small valve to bottom large ball on top. The spring usually goes between
them.
--
Steve W.

thanks Steve , i tried that and didn't work , i put the small ball 1st
then the big ball then the spring and plug, it WORKS , thanks for the
idea though ,

Depends on which factory and work group made it....

[Gene]

Post by n***@hotmail.com
I have a 3.5 ton sams club Michelin floor jack , it needed fluid and
when i took out the refill plug , the spring and crome balls came
out , i picked up the parts and there were 2 balls ( big and small ) ,
i can Not find any info on the web about these , the Question is , IS
there 2 balls or is there only ment to be 1 ??? and what order do they
go back in ?
thx

http://www.hyjacks.com
Loading Image...
http://www.hyjacks.com/H7.HTM
http://www.blackhawkparts.com

[l***@my-deja.com]

I have a 3.5 ton sams club Michelin floor jack, it
needed fluid and when i took out the refill plug, the
spring and crome balls came out , i picked up the
parts and there were 2 balls ( big and small ), I
can not find any info on the web about these

Here's a diagram. The little ball goes in first, then the
small spring, then the big ball, then the big spring. I've
seen this in a couple of jacks:

Loading Image...

[Gene]

Post by l***@my-deja.com

I have a 3.5 ton sams club Michelin floor jack, it
needed fluid and when i took out the refill plug, the
spring and crome balls came out , i picked up the
parts and there were 2 balls ( big and small ), I
can not find any info on the web about these

Here's a diagram. The little ball goes in first, then the
small spring, then the big ball, then the big spring. I've
http://img109.imageshack.us/img109/9065/jack07.jpg

Of the same dimensions, file size and a substring of the same
file name, and excerpted straight from the site I had provided:
Loading Image...

On this page:
http://www.hyjacks.net/ani_extraction.htm

Good work.

[Nelson]

replying to nitrodag, Nelson wrote:
Heavier jacks may have 2 ball bearings that are actually check valves, and sit
on a conical hole (1 per) but they should be where the pump/piston is. Never
in the reservoir